Bead Colors Needed:
- Red - 112
- Cheddar - 32
- Yellow - 14
- Turquoise - 35
- Light Blue - 282
- Dark Blue - 82
- Clear - 47
- Grey - 72
- Black - 4
- White - 355
See the Supply List for beads and tools you can purchase here. You will also need:
- Clear tape
Download the PDF for the Cruise Ship Project Pattern. Assemble the TWO large square pegboards as shown. Cut out the individual halves of the chart and tape them together so that you can see the whole design at once. If you are using clear pegboards, slide the actual-size pattern underneath them. Now, place all the beads for the design.
Ask an adult to fuse your designs. Place your pegboard on a flat, heat-safe surface. Set a household iron to the medium setting. Place ironing paper over the pegboard. In a circular motion, begin to iron the project. When ironed properly, the beads will still have open centers. DO NOT OVER-IRON as this will cause the beads to close and can make assembly of your project more challenging. Let the design cool.
Remove the paper and bead design from the pegboard. Flip the design over to expose the non-fused side. Repeat step two. Let cool completely. Once the design is cool, peel off the ironing paper. Your pegboards and ironing paper are reusable.
Note: Beads need heat for about 10-20 seconds per side to fuse evenly. Lift the paper occasionally to see how the beads are fusing. Additional heating time may be required.
ASSEMBLY: Position the ship at right angles to the feet and slide together at the slots.